MAVERICK¿ Measurement Module Spectrometer PN 820-01367 (originally part of a kit PN 820-01519) Finished Goods PN 820-01496

Class I - Dangerous

What Should You Do?

Check if you have this product:
PN 820-01367 (originally part of a kit PN 820-01519) Finished Goods PN 820-01496
Do not eat it: Even if it looks and smells fine, do not consume this product.
Throw it away or return it: You can return the product to the store for a full refund.
Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
Report problems: Report any issues to the FDA's Safety Reporting Portal.

⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.

Company:: REPLIGEN CORPORATION
Reason for Recall:: Potential Elevated Laser Output A disconnected cable or a poorly crimped cable under mechanical bending stress can cause loss of electrical contact. At one connection on the board, the failure can drive the laser output to approximately 1,600 mW. Potential Unintended Laser Firing A disconnected, or poorly crimped cable can falsely signal a fire command during measurement cycles. At a secondary location on the board, this fault can lead to unexpected laser activation during operation. Safety logic prevents firing when the system is idle.
Classification:: Class I - Dangerous
Dangerous or defective products that predictably could cause serious health problems or death.
Status:: ongoing

MAVERICK¿ Measurement Module Spectrometer PN 820-01367 (originally part of a kit PN 820-01519) Finished Goods PN 820-01496

PN 820-01367 (originally part of a kit PN 820-01519) Finished Goods PN 820-01496

Always verify recall information with the official FDA source:

FDA Recall Number: Z-1024-2026